OTP Speech Chip SC5080B

1、Description

The SC5080B are single-chip voice synthesizing CMOS IC. They are embedded EPROM architecture, and OTP (One Time Programmable) Speech chip,   Each body has one input and two I/O pins. Through accurate internal oscillation, external Rosc is unnecessary. There is PWM and 13bit DAC output for voice. Thus any external component is not required.Maximum 128 voice groups. serial mode maximum 255 voice groups ,moble One Group contain several steps(voice section ); Maximum 1536 steps and 16 steps volume control for all the Groups. Maximum 44.1Khz Play Rate,Maximum 80 seconds Voice/ Midi.Each Step can be define Trigger Mode, Output  Status,  Voice  Section,  Mute  length,  I/O  Type  &  Simple Programming  Function.   Support  three  mode  trigger  IC  (Stand  Alone,  Serial Trigger Mode ). Easy use development system is for function selection and voice combination . PC download the ROM code by the OTP_Writer.

2、Funtions :

(1).MAX voice file : 1536

(2).MAX Trigger Groups : 255

(3).MAX Step : 768
 (4).Operating Voltage range: 2.0V ~ 5.5V  

(5).Total Voice Duration : 80S (6K Samples)

(6).I/O pin : 3  

(7).Voice output : PWM/DAC

(8).Sequential Key : OKY1 -> 128 Groups.IO1-> 1 Group.IO1-> 1 Group

(9).Debounce time : 1ms us or 100 ms

(10)Step can change Trigger I/O Type, Trigger Mode & Output Status.

(11).SOP8 Package。

(12).Three Mode Trigger IC :

(13).Key Stand-alone Trigger Mode :

A.  Edge/Level  

B.  Hold/Unhold

C.  Retrigger/Irretrigger

(14).Serial Trigger Mode :

Combinations of OKY to trigger maximum 127 Voice Group.

(15).Output status (for each Output pin):  

A.  Stand by Status. (High/Low Status)

B.  Busy Low Active.

C.  Busy High Active.

D.  LED Flash at 6 Hz.

E.  LED Flash at 3 Hz.

F.  LED Flash at 1.5 Hz.

G.  PWM for LED Dimming Control.